Product Catalog
The prestige new-generation Uni-Matic by FISCO — Turkey's most sought-after and best-selling steel tape, with an ergonomic, palm-fitting body. The ABS outer case is ultrasonically bonded. It has a 16 mm 'mat-coat' white blade and an easy latch-locking system.
The new Double-Lok model combines an ergonomic design with side locking and a bottom stop. Blade standout: 180 cm for the 19 mm blade and 240 cm for the 25 mm blade.
A light, very high-quality tape with a wide range of uses. It uses a fully millimetre, two-colour 10 mm blade. The new Satellite body is made of unbreakable grey ABS and comes with a belt clip.
FISCO laser distance meters are made for professional use. The red laser is brighter and sharper than comparable devices, and the display is clearer. Besides length, they quickly perform addition, subtraction, area and volume calculation, the Pythagoras function and angle calculation, and can store results in memory.
The classic and roller stirrup-bending levers are made entirely of steel strip and round stock. The bending channels of the classic lever are hardened; all rollers of the roller levers are hardened too. The channel and roller sit at a height that ensures safe bending. Lubrication channels are cut in the bending flanges to extend service life.
The Yakar forged-steel adze is a reliable, long-lasting tool for professional use. Its forged steel head performs well even in tough conditions and delivers a powerful blow to ease your work. The ergonomic wooden handle gives a comfortable grip during long use. It works efficiently in construction, ironwork and repairs.
The Deca adze is a reliable, long-lasting tool for professional use. Its forged steel head performs well even in tough conditions and delivers a powerful blow to ease your work. The ergonomic wooden handle gives a comfortable grip during long use. It works efficiently in construction, ironwork and repairs.
The SaitDemirci adze is a reliable, long-lasting tool for professional use. Its forged steel head performs well even in tough conditions and delivers a powerful blow to ease your work. The ergonomic wooden handle gives a comfortable grip during long use. It works efficiently in construction, ironwork and repairs.
The Spor adze is a reliable, long-lasting tool for professional use. Its forged steel head performs well even in tough conditions and delivers a powerful blow to ease your work. The ergonomic wooden handle gives a comfortable grip during long use. It works efficiently in construction, ironwork and repairs.
The Yakar rebar-tying pincers are forged in one piece from special wear-resistant tool steel using hot forging. Maximum wire it cuts is 3 mm (normalised tying wire).
High wear resistance and balanced weight distribution. Precisely machined, so especially favoured by tradespeople. Ideal for heavy-duty work. Cutting-edge hardness approx. 60 HRC.
The classic and roller stirrup-bending levers are made entirely of steel strip and round stock. The bending channels of the classic lever are hardened; all rollers of the roller levers are hardened too. The channel and roller sit at a height that ensures safe bending. Lubrication channels are cut in the bending flanges to extend service life.
Ride-on power trowel for large areas and demanding jobs. Precise torque, speed and smart electronics deliver a perfectly flat concrete surface. An excellent power-to-weight ratio gives the rotors ample power and high travel speed for full control and consistent results.
Power trowel for finishing concrete floors and screed. Used on both open and enclosed sites, from the start of construction through to handover. It levels and smooths fresh concrete for a hard, even surface.
Power trowel for finishing concrete floors and screed. Used on both open and enclosed sites, from the start of construction through to handover. It levels and smooths fresh concrete for a hard, even surface.
Power trowel for finishing concrete floors and screed. Used on both open and enclosed sites, from the start of construction through to handover. It levels and smooths fresh concrete for a hard, even surface.
Power trowel for finishing concrete floors and screed. Used on both open and enclosed sites, from the start of construction through to handover. It levels and smooths fresh concrete for a hard, even surface.
Power trowel for finishing concrete floors and screed. Used on both open and enclosed sites, from the start of construction through to handover. It levels and smooths fresh concrete for a hard, even surface.
Power trowel for finishing concrete floors and screed. Used on both open and enclosed sites, from the start of construction through to handover. It levels and smooths fresh concrete for a hard, even surface.
Power trowel for finishing concrete floors and screed. Used on both open and enclosed sites, from the start of construction through to handover. It levels and smooths fresh concrete for a hard, even surface.
A bench machine designed for cutting hard metals such as rebar in construction, manufacturing and industry. It delivers high productivity, efficiency and safe cutting. Metal is cut faster and more reliably, raising overall output.
A machine for bending rebar and other hard metals in construction, manufacturing and industry. Built for high productivity, efficiency and safe operation. Bending is done faster, more safely and more accurately, increasing output.
A bench machine designed for cutting hard metals such as rebar in construction, manufacturing and industry. It delivers high productivity, efficiency and safe cutting. Metal is cut faster and more reliably, raising overall output.
A machine that bends rebar into spirals using mechanical power transmission. It produces any helix, spiral, ring or half-ring, with adjustable pitch between loops. Preferred for bored-pile work in bridge building and for bending circular rebar used in road tunnels.
A bench machine designed for cutting hard metals such as rebar in construction, manufacturing and industry. It delivers high productivity, efficiency and safe cutting. Metal is cut faster and more reliably, raising overall output.
The ASE SM 5 is Turkey's best-selling gypsum plastering station and a favourite of professionals. Its reinforced chassis and the dust-proof panel of the automation system allow work on site with minimal servicing. It continuously and fully automatically mixes ready gypsum- or cement-based dry mixes and pumps them to spray-apply plaster.
A machine that bends rebar into spirals using mechanical power transmission. It produces any helix, spiral, ring or half-ring, with adjustable pitch between loops. Preferred for bored-pile work in bridge building and for bending circular rebar used in road tunnels.
A machine for bending rebar and other hard metals in construction, manufacturing and industry. Built for high productivity, efficiency and safe operation. Bending is done faster, more safely and more accurately, increasing output.
A machine for bending rebar and other hard metals in construction, manufacturing and industry. Built for high productivity, efficiency and safe operation. Bending is done faster, more safely and more accurately, increasing output.
A machine for bending rebar and other hard metals in construction, manufacturing and industry. Built for high productivity, efficiency and safe operation. Bending is done faster, more safely and more accurately, increasing output.
A machine for bending rebar and other hard metals in construction, manufacturing and industry. Built for high productivity, efficiency and safe operation. Bending is done faster, more safely and more accurately, increasing output.
The B-series plug suits a wide range of bases — from solid to hollow building materials (concrete, masonry brick, aerated concrete, hollow brick, block, etc.). Four expanding wings give a full grip in the material. Suitable for fixing light cabinets, PVC skirting, bathroom accessories, pipe clamps and similar jobs.
The A-series plug is made from genuine HDPE raw material and resists cracking. It is longer than comparable plugs, with increased load capacity. Side lugs keep in-wall rotation to a minimum. Produced in any required colour.
Cover spacer for bored (cast-in-place) piles. In pile work that strengthens the ground, it maintains the required distance between the soil and the reinforcement. This protects the rebar from the harmful effects of the surrounding soil.
Mesh corner bead for the outer corners of interior walls. Its meshed wings give a firm bond when gypsum, plaster or similar are applied. It protects external corners from impact and gives them a clean, even finish. Made of PVC in 2.5 m lengths.
A plug for mounting all kinds of drywall fittings. It securely holds light cabinets, PVC cornices, switches, light chandeliers and bathroom and kitchen accessories. The threaded entry in its head makes installation extremely easy.
A strip for forming joints (grooves) in reinforced-concrete structures. Made from recycled PVC.
Butterfly (spring-toggle) plug for mounting all kinds of drywall fittings. It provides the best hold for light cabinets, PVC skirting, cornices, switches, light chandeliers and bathroom and kitchen accessories.
A chamfer strip for forming a bevel on the corners of columns and beams. Made of genuine PVC and impact-resistant. Produced in two versions — with and without wings. It can be reused many times.
Made for protection and safety. It fits onto tie-rod bars or projecting rebar on site. Produced in red and orange. Available in two shapes — mushroom-head and hourglass.
A chamfer strip for forming a bevel on the corners of columns and beams. Made of genuine PVC and impact-resistant. Produced in two versions — with and without wings. It can be reused many times.
A helical plug for fixing into aerated-concrete partition walls. Its reverse helix gives a firm grip in aerated concrete for any mounting job.
Made for protection and safety. It fits onto tie-rod bars or projecting rebar on site. Produced in red and orange.
The D-series plug is used in hollow brick, hollow block, solid brick, concrete and drywall. It securely holds bathroom and kitchen accessories, PVC skirting, chandeliers, cable trunking, switches and wall accessories. Used with wood and chipboard screws; the screw length is chosen to match the plug length.
Used to close tie-rod holes in plywood formwork. Its head makes fitting and removal easy.
The C-series plug gives the best result in solid (cast) concrete. It can also be used in hollow materials (hollow brick, block, aerated concrete, etc.). It delivers top performance when mounting PVC, plastic, wood, metal and insulation materials.
Used to close stud holes in plywood formwork. It can also close the holes in pipe end caps.
Fits onto the ends of the tie-rod tube that keeps the formwork at a set distance, and protects the tie-rod bar from concrete leakage. The angle and cavities in its head are easily filled with joint grout.
A tube that protects the tie-rod bar during wall concreting in steel and timber formwork. It lets the tie-rod bar be reused many times. Made in any required diameter and length.
A single-leg chain sling — a lifting attachment with a defined working load limit for general lifting. Before release it passes static tensile and bending tests and is put into service only after meeting every requirement, which makes it safe to use.
A two-leg chain sling — a lifting attachment with a defined working load limit for general lifting. Before release it passes static tensile and bending tests and is put into service only after meeting every requirement, which makes it safe to use.
Chain-sling hooks are durable connecting components for safely lifting and moving heavy loads.
Use: in dynamic systems with lifting operations and in static systems with lashing — as a removable connector for attaching wire rope, chain and other rigging parts. Threaded types are generally used for permanent applications, split-pin types for temporary ones.
Use: in dynamic systems with lifting operations and in static systems with lashing — as a removable connector for attaching wire rope, chain and other rigging parts. Threaded types are generally used for permanent applications, split-pin types for temporary ones.
Use: in dynamic systems with lifting operations and in static systems with lashing — as a removable connector for attaching wire rope, chain and other rigging parts. Threaded types are generally used for permanent applications, split-pin types for temporary ones.
Four-leg chain slings are designed for balanced lifting of heavy loads. With a chain and hook on each leg, they attach the load at four points.
